LIGHT POLES
GET THE LIGHT WHERE YOU NEED IT MOST!
If you need the light for the safety of your staff and customers or maybe just to light up your inventory at your car dealership at night, our LED parking lot lights not only will do just that, But they will do it EFFICIENTLY!
SHOW OFF YOUR INVENTORY!
Especially in the winter months, it gets dark quick! Sometimes even when your dealership is STILL OPEN! Make a statement in your city and make your inventory the brightest in the town with WerkzDirect LED parking lot lights!
Single Tenon Adapter
for
4" Poles
Low-Profile Bullhorn Bracket
with 2 Tenons
Low-Profile Bullhorn Bracket
with 3 Tenons
Low-Profile Bullhorn Bracket with 4 Tenons
THE DETAILS YOU SHOULD KNOW
OVERAL WIDTH
4" FOR ALL SIZE POLES
WALL GAUGE THICKNESS
10' THROUGH 25' ARE 11 GAUGE, 30' POLES ARE 7 GAUGE
MAXIMUM EPA RATING
10' - 21 | 15' - 7.6 | 20' - 6.4 | 25' - 3.4 | 30' - 7.6
Single Tenon Adapter
for 4" Poles
Convert the top of a 4" square pole into a 2-3/8 inch tenon with this steel adapter.
The gauge and material of the pole will not affect your ability to mount with this adapter, the bottom of this adapter slides directly inside the pole.
Low-Profile Bullhorn Bracket
with 2 Tenons
The shape of your pole is no issue due to the fact that the bottom of this bracket has a 2.5" inner diameter, which allows it to slip fit over any 2 3/8" tenon.
Each of our tenons also have a 2-3/8" outer diameter, which allows you to slide any light fixture with a standard 2 3/8" slip fitter over it.
We also have other bottom options that fit over a 2 7/8" or 4" tenon.
Low-Profile Bullhorn Bracket
with 3 Tenons
The bottom of this bracket has a 2 1/2" inner diameter which allows it to slip fit over any 2 3/8" tenon.
Each tenon has a 2 3/8" outer diameter which allows any light fixture with a standard 2 3/8" slip fitter to slide over it.
Bottom portion options that fit over a 2 7/8"
or 4" tenon are also available.
Low-Profile Bullhorn Bracket
with 4 Tenons
The bottom of this bracket has a 2 1/2" inner diameter which allows it to slip fit over any 2 3/8" tenon.
Each tenon has a 2 3/8" outer diameter which allows any light fixture with a standard 2 3/8" slip fitter to slide over it.
Bottom portion options that fit over a 2 7/8"
or 4" tenon are also available.
WERKZDIRECT has helped our faculty maximize its full potential. Their team is knowledgeable and their products are second to none with a warranty that is unmatched. I wouldn’t think twice to recommend them to a friend or client.
PARKING LOT GALLERY
Newsletter
Newsletter
Contact Info
Website Design by:
